2 Level Modular Homes

2 Level Modular Homes are two-storey steel modular buildings made by stacking or combining factory-built units. They are used for temporary residential communities, project offices, staff accommodation, and other projects that need lower- and upper-floor spaces in the same modular structure.

Approx. 5.6 m Two-Level Building Height

The assembled two-storey building is approximately 5.6 m high, with about 2.5–2.6 m of interior height on each level. On sites where the footprint cannot be expanded easily, the second level adds usable floor area without reducing normal room height on either floor.

Galvanized Steel Frame for Stacked Modules

Each module uses Q235B or Q355B hot-dip galvanized steel with profile thicknesses of 2.0 mm, 2.3 mm, or 2.5 mm. In a stacked arrangement, loads pass through the aligned frame lines while the modules also have to withstand transport, erection, wind, and regular use. The steel frame provides the load path, and the galvanized and baked surface reduces corrosion exposure on the structural members.

Steel Decking with an Acoustic Layer

The inter-floor assembly combines steel decking with a sound-insulation layer. In bedrooms, offices, or accommodation blocks, footfall and furniture movement can occur directly above occupied rooms. The layered floor build separates the structural deck from the finished space and reduces direct transmission of impact and airborne noise between floors.

Module Footprint

Each module can be sized to the approved structural and architectural layout. Length ranges from 3 to 12 m and width from 3 to 8 m.

Two-Level Floor Plan

The coordinated two-storey plan can define ground-floor and upper-floor zoning, stair position, corridors, balcony or landing interfaces, guardrail zones, and door and window positions.

MEP & Finish Coordination

Floor-by-floor electrical routes, plumbing risers, air-conditioning penetrations, external color, internal finishes, and service openings can be coordinated in the approved drawings.

• Steel-frame fabrication, stacked connection preparation, and execution checks are carried out according to EN 1090-2. Incoming structural members are checked against the approved grade and gauge. Inter-floor steel decking and wall materials are also matched to the project bill of materials before assembly.
• Inspection records, non-conformance control, corrective actions, and release approval are managed according to an ISO 9001 quality-management system. Inspectors check module squareness, vertical alignment points, stacked connection interfaces, floor-deck level, stair opening dimensions, and coating condition before final fit-out.
• Before packing, each level is checked for dimensions, door and window operation, floor flatness, and connection interfaces. Stair, landing, and guardrail components included in the supply scope are trial-fitted or dimension-checked against the approved assembly drawing before shipment.

Hot Tags: 2 level modular homes, China 2 level modular homes manufacturers, suppliers, factory, Compact Living Prefab Homes, One Level Modular Homes, Prefab Homes With Basement, Prefab Shower House, Simple Prefab Homes, Upscale Modular Homes